Aluminum-Zinc A-3
Sealing holes and cracks in metal radiators, condensers,
heat exchangers and other products. Repair of corrosion-related and mechanical
damage, holes, burn-throughs, chips, filling cracks, potholes
and other defects in aluminum, steel, and cast iron parts.
Aluminum A-2
Restoring the shape of metal parts. Filling
cavities, pores, cracks, and other defects in products made of
aluminum and its alloys. Restoration of seating surfaces
bearings in aluminum, steel, and cast iron parts.
Copper CP-1
Conductive coatings on aluminum, steel, and other metals
alloys, glass, and ceramics. Surface coating of aluminum,
steel, cast iron, ceramic, and glass parts for
soldering with tin.
Z-01 Zinc
Corrosion protection for specific areas of steel
parts and components of steel structures (in particular
(welded joints).
C-3 Copper-Zinc
Filling cavities, cracks, and other defects in steel, cast iron,
bronze and brass parts. Repair of parts that operate at
at temperatures up to 800°C. Restoration of bearing seats in
steel and cast iron parts.
Nickel Ni-1
An electrically conductive coating for the contact pads of electrical equipment.
Anti-corrosion and heat-resistant coatings for protecting steel parts.
Ni-3 Nickel-Zinc
Filling cavities, burn-throughs, cracks, and other defects in
products that operate at temperatures ranging from 800 to 1200°C.
A-03MP Aluminum
Anti-corrosion coatings. Restoration of the cladding layer
on parts at low temperatures.
A-1MP Aluminum
Aluminum backing, for subsequent application of copper
and nickel coatings on ceramics.
Copper CU-65P
Conductive Coatings on Glass.
A-1MC Aluminum
Coatings with limited layer thickness. Reflective
A coating on glass with enhanced corrosion resistance.
Copper CU-63P
A coating with a limited copper layer thickness.
Alumina A 00-01
Abrasive for cleaning ceramic and other surfaces
sensitive surfaces.
Alumina A 00-02
Cleaning and Sandblasting/Abrasive Blasting Preparation
steel and cast iron surfaces prior to applying metal coatings
coatings (premature wear of the nozzle insert).
Alumina A 00-03
Cleaning and Sandblasting/Abrasive Blasting Preparation
steel and cast iron surfaces prior to applying metal coatings
coatings (premature wear of the nozzle insert/increased
surface roughness).
