REYM-102P

100.00uah.

The model of the REYM-102P device is the modernized model of the REYM-101P device and belongs to the professional equipment allowing to carry out works with two types of powder materials, saving time for powder replacement. This model is based on a new electronic control board, which allowed to achieve maximum stability and safety at work. Also the device for spraying of metal REYM-102R is equipped with a new powder feeder. When improving and modifying the new powder feeder, the main requirement was to refine the design mechanisms that provide a stable supply of powder. In the professional model 102P the reducer with the manometer intended for control and exact regulation of compressed air depending on the performed works, from the minimum 0,5 to 0,9 MPas is established, and the dehumidifier will prepare compressed air for work.

SKU: VN00189 Category:

Purpose of equipment:

The REYM 102-P cold spray metal spraying machine is a process equipment designed for spraying metal coatings and sandblasting surfaces by spraying powdered materials with compressed air and high temperature. The following factors occur during the operation of the equipment:

compressed air, pressure up to 0.9 MPa (9 kgf / cm²);
voltage 220V;
increased noise at work;
high-speed heated air-powder jet.
Specifications:

Maximum compressed air pressure, 0.9 kgf / cm² (0.9 MPa)
Working pressure of compressed air from 5 to 9 kgf / cm² (from 0,5 to 0,9 MPas)
Maximum compressed air flow, 0.45 m³ / min;
Class of compressed air pollution, GOST 17433-80; 1, 3, 5
Temperature of the spray unit during operation, not more than 50ºС.
Noise level when working without a protective camera; not more than 75 dB.
Powder dispenser with smooth adjustment of powder supply from 0.1 to 0.8 g / s
Time to enter the mode, no more than 8 s.
Power supply:

Frequency of single-phase alternating current 50 ± 1 Hz.
Voltage 220 V.
Maximum power 3300W.
Complete set:

The REYM-102P device of 1 piece.
Powder feeder 2 pcs.
Block sprayers 1 pc.
Reducer with manometer 1 pc.
Brass nozzle 1 pc.
Nozzle insert (tube) 1 pc.
Kit weight:

9.5 kg.
Field of application

Car repair
Cracks in the cylinder block
Seats were cloned
Bearing seats
Burns and cracks in aluminum
Repair of aluminum wheels
Galvanizing of car body parts
Elimination of corrosion damage to the body
Repair of molds for molding plastics
Elimination of aluminum casting defects
Sealing of aluminum radiator tubes
Repair of air conditioning tubes in cars
Metallization of ceramic plates and glass
Application of copper conductive contacts
Repair of automobile glass heating
Application of copper contacts on aluminum
Restoration of propeller blades
Repair and restoration in shipbuilding
Repair of printing shaft
Restoration and restoration of chrome parts of a retro car.