Purpose of equipment:<\/p>\n
The REYM 101-P cold spray metal spraying machine is a process equipment designed for spraying metal coatings and sandblasting surfaces by spraying powdered materials with compressed air and high temperature. The following factors occur during the operation of the equipment:<\/p>\n
compressed air, pressure up to 0.9 MPa (9 kgf \/ cm\u00b2);
\nvoltage 220V;
\nincreased noise at work;
\nhigh-speed heated air-powder jet.
\nSpecifications:<\/p>\n
Maximum compressed air pressure, 0.9 kgf \/ cm\u00b2 (0.9 MPa)
\nWorking pressure of compressed air from 5 to 9 kgf \/ cm\u00b2 (from 0,5 to 0,9 MPas)
\nMaximum compressed air flow, 0.45 m\u00b3 \/ min;
\nClass of compressed air pollution, GOST 17433-80; 1, 3, 5
\nTemperature of the spray unit during operation, not more than 50\u00ba\u0421.
\nNoise level when working without a protective camera; not more than 75 dB.
\nPowder dispenser with smooth adjustment of powder supply from 0.1 to 0.8 g \/ s
\nTime to enter the mode, no more than 8 s.
\nPower supply:<\/p>\n
Frequency of single-phase alternating current 50 \u00b1 1 Hz.
\nVoltage 220 V.
\nMaximum power 3000W.
\nComplete set:<\/p>\n
The REYM-101 device of 1 piece.
\nPowder feeder 1 pc.
\nBlock sprayers 1 pc.
\nBrass nozzle 1 pc.
\nNozzle insert (tube) 1 pc.
\nKit weight:<\/p>\n
6.5 kg.
\nField of application<\/p>\n
Car repair
\nCracks in the cylinder block
\nSeats were cloned
\nBearing seats
\nBurns and cracks in aluminum
\nRepair of aluminum wheels
\nGalvanizing of car body parts
\nElimination of corrosion damage to the body
\nRepair of molds for molding plastics
\nElimination of aluminum casting defects
\nSealing of aluminum tubes of a radiator
\nRepair of air conditioning tubes in cars
\nMetallization of ceramic plates and glass
\nApplication of copper conductive contacts
\nRepair of automobile glass heating
\nApplication of copper contacts on aluminum
\nRestoration of propeller blades
\nRepair and restoration in shipbuilding
\nRepair of printing shaft
\nRestoration and restoration of chrome parts of a retro car.<\/p>\n","protected":false},"excerpt":{"rendered":"
The REYM-101 model has become one of the most popular models on the market, among small service stations and repair shops. For a small price you can get a device for gas-dynamic spraying of metal, which will provide a full process and the result of high quality. Simple settings of the REYM-101 device will not take the user much time. Smooth regulation of temperature and supply of powder material, allow the master to achieve necessary quality at drawing coverings. The powder feeder is removable, allows to make fast replacement of powder. The spray unit gives a maximum temperature of 600 C \u00ba, this temperature is enough to work with most powder materials. The model of the device of gas-dynamic spraying of metal REYM-101 is not completed with a reducer and a moisture separator. When connecting the device to the compressor it is necessary to make sure that the installed reducer with a dehumidifier has a capacity of compressed air of 0,45 m\u00b3 \/ min.<\/p>\n","protected":false},"featured_media":7754,"template":"","meta":[],"product_cat":[152],"product_tag":[],"yoast_head":"\n