Purpose of equipment:<\/p>\n
The REYM 102-P cold spray metal spraying machine is a process equipment designed for spraying metal coatings and sandblasting surfaces by spraying powdered materials with compressed air and high temperature. The following factors occur during the operation of the equipment:<\/p>\n
compressed air, pressure up to 0.9 MPa (9 kgf \/ cm\u00b2);
\nvoltage 220V;
\nincreased noise at work;
\nhigh-speed heated air-powder jet.
\nSpecifications:<\/p>\n
Maximum compressed air pressure, 0.9 kgf \/ cm\u00b2 (0.9 MPa)
\nWorking pressure of compressed air from 5 to 9 kgf \/ cm\u00b2 (from 0,5 to 0,9 MPas)
\nMaximum compressed air flow, 0.45 m\u00b3 \/ min;
\nClass of compressed air pollution, GOST 17433-80; 1, 3, 5
\nTemperature of the spray unit during operation, not more than 50\u00ba\u0421.
\nNoise level when working without a protective camera; not more than 75 dB.
\nPowder dispenser with smooth adjustment of powder supply from 0.1 to 0.8 g \/ s
\nTime to enter the mode, no more than 8 s.
\nPower supply:<\/p>\n
Frequency of single-phase alternating current 50 \u00b1 1 Hz.
\nVoltage 220 V.
\nMaximum power 3300W.
\nComplete set:<\/p>\n
The REYM-102P device of 1 piece.
\nPowder feeder 2 pcs.
\nBlock sprayers 1 pc.
\nReducer with manometer 1 pc.
\nBrass nozzle 1 pc.
\nNozzle insert (tube) 1 pc.
\nKit weight:<\/p>\n
9.5 kg.
\nField of application<\/p>\n
Car repair
\nCracks in the cylinder block
\nSeats were cloned
\nBearing seats
\nBurns and cracks in aluminum
\nRepair of aluminum wheels
\nGalvanizing of car body parts
\nElimination of corrosion damage to the body
\nRepair of molds for molding plastics
\nElimination of aluminum casting defects
\nSealing of aluminum radiator tubes
\nRepair of air conditioning tubes in cars
\nMetallization of ceramic plates and glass
\nApplication of copper conductive contacts
\nRepair of automobile glass heating
\nApplication of copper contacts on aluminum
\nRestoration of propeller blades
\nRepair and restoration in shipbuilding
\nRepair of printing shaft
\nRestoration and restoration of chrome parts of a retro car.<\/p>\n","protected":false},"excerpt":{"rendered":"
The model of the REYM-102P device is the modernized model of the REYM-101P device and belongs to the professional equipment allowing to carry out works with two types of powder materials, saving time for powder replacement. This model is based on a new electronic control board, which allowed to achieve maximum stability and safety at work. Also the device for spraying of metal REYM-102R is equipped with a new powder feeder. When improving and modifying the new powder feeder, the main requirement was to refine the design mechanisms that provide a stable supply of powder. In the professional model 102P the reducer with the manometer intended for control and exact regulation of compressed air depending on the performed works, from the minimum 0,5 to 0,9 MPas is established, and the dehumidifier will prepare compressed air for work.<\/p>\n","protected":false},"featured_media":7748,"template":"","meta":[],"product_cat":[152],"product_tag":[],"yoast_head":"\n